Connectors - Fujitsu Components Asia, Limited

Home > Connectors

Fujitsu Components Asia Pte Ltd Connector Image

Connectors

Fujitsu introduces ultra-thin micro SD connector

Using advance technology, new connector has lowest profile for micro SD cards.

Read Press Release | Get Datasheet

New Waveguide Technology Brings New Application

3D polymer waveguide breakthrough leads to development of a waveguide-based 4-channel optical parallel transceiver.

Read Press Release | Technical Bulletin

Differential Right-Angle Connector Allows High-Speed Perpendicular and Coplanar PCB Connections

FCN-260 Right Angle Stacking Connector_small.jpg (11k)

With the growing popularity of its high-speed MicroGiGaCN connector line, Fujitsu has expanded it with an SMT right-angle plug. Mateable with the line’s straight and right-angle sockets, high-speed perpendicular or coplanar board-to-board connections are now possible. Tested from 622MB up to 10GB per channel over standard FR-4 material, the RoHS-compliant device meets the current and future signal speed requirements of InfiniBand®, 10G Ethernet, Serial Attached SCSI™, PCI Express, and SATA2.

Read Press Release | Get Datasheet

X2 CX4 Copper Module Provides Cost-Effective and Reliable 10Gb Signal Transport

X2 Copper Transceiver Module photo.jpg (17k)

Fujitsu has expanded its offering of CX4 copper modules with the addition of an X2 module featuring a built-in media detect circuit. The X2 module offers a compact, cost-effective and reliable method of bandwidth transport of up to 10Gb for distances of 20m over standard InfiniBand copper cable, or 300m over standard multi-mode fiber.

Read Press Release | Get Datasheet

Optical Transceiver Module Boasts Media Converter for Flexibility in the Data Center

Optical Transceiver Module photo.jpg (14k)

Fujitsu offers IT managers a low-cost, flexible way to implement 10G Ethernet data transfer with a new optical transceiver module featuring a built-in intelligent media converter.

Read Press Release | Get Datasheet

XENPAK Module Boosts Copper Cable Reach

There’s been a lot of talk lately about expanding copper’s data transfer capabilities to meet increasing bandwidth demands. Now Fujitsu has introduced its x-MGC, a 10Gigabit Ethernet CX4 module that provides a low-cost solution for signal transfer over copper cabling up to 25 m.

Read Press Release | Get Datasheet

microGiGaCN^TM Connector Series Expands

Vertical Mount Connector Photo.jpg (17k)

Adopted in various forms by InfiniBand, 10G CX4 Ethernet, and 10G Fiber Channel standards bodies, the microGiGaCN copper connector series is a proven winner for cost-efficient, high-speed data transfer. That’s why Fujitsu has added yet another configuration: a latching, vertical board-mount I/O socket in 4x and 12x versions for InfiniBand applications.

Read Press Release | Get Datasheet

microGiGaCN^TM High-Speed Copper Connector Series Meets I/O Standard for SA-SCSI, S-ATA and 10G Fiber Channel

Keeping interconnect technology up to speed with ever-increasing data transfer rates is one of Fujitsu’s strengths. That’s why we are the only manufacturer that supplies a full-range of industry-standard, high-speed copper interconnects for various high-performance transport technologies. Our latest addition to our microGiGaCN series is a standard I/O plug with thumbscrews for Serial Attached SCSI 4-lane, Serial ATA-2 4-lane and 10G Fiber Channel.

Read Press Release | Get Datasheet

Loop-Back Module Tests High-Speed Systems

Our new loop back module was designed especially for testing signals in high-speed systems. The secret is the internal printed circuit board. It provides ultra-low cross talk and in pair skew to maintain signal integrity during testing.

Read Press Release | Get Datasheet

Differential Copper Cables Meet the High-Bandwidth Challenge

As the need for speed increases in datacom applications, Fujitsu’s new high-performance copper cable assembles are a viable, lower cost option to fiber optic cables. The new cable assemblies are compatible with InfiniBand^TM,10G Ethernet (CX4), and 10G Fibre Channel specifications, and capable of transmission speeds up to 3.187Gbps with less than 4% crosstalk.

Read Press Release | Get Datasheet

New Connector Simplifies High-Speed Differential Data Transfer

Designers of high-speed data-link/LVDS applications just got another boost from Fujitsu’s matched impedance MicroGiGaCN connector family. The addition of a mezzanine, right-angle socket that’s intermateable with the series’ stacking plug enables the use of standard FR-4 material to transfer differential signals of 3.125Gbps and above with no more than 4% crosstalk at 50ps rise time.

Fujitsu Components and FCI Ink Connector Agreement

Fujitsu Takamisawa Component Limited and FCI, Inc. USA are joining forces to manufacturer and sell Fujitsu's high-speed, MicroGiGaCN differential connector.

Fujitsu Connector Tapped for InfiniBand I/O Standard

In an effort to bring processor speeds and I/O performance into balance, the InfiniBand Trade Association has chosen Fujitsu Components' MicroGigaCN as the standard I/O interface. Utilizing a 2.5Gbit/sec wire speed connection with eight or twenty-four pairs, the MicroGigaCN offers a cost-effective I/O solution for high-speed data and telecommunications applications.

Read More | Get Datasheet

Stacking Matched-Impedance Connectors Keep Crosstalk in Check

Speed requirements for next-generation datacom, telecom, instrumentation, medical and computer equipment continue to increase thanks to ever-rising data transfer rates. These devices also continue to shrink in size. What's the answer? High-density matched impedance connectors that control crosstalk and offer design flexibility.

Read More | Get Datasheet

Low Voltage Connector Intro'd for 3.3V PC Cards

photo-story_connectors_3-3volt_small.jpg (32k)

If you're designing any type of mobile or wireless product with a PC card application, you probably need low-voltage components to conserve battery power. Look no further -- Fujitsu Components' new, low-voltage PC Card connector accommodates 3.3V Type I, II or III PC cards.

Read More | Get Datasheet

FCN290H Cuts Cross-Talk

If you're concerned about line noise and crosstalk in your compact, high-speed devices, then our matched-impedance FCN-290H series may provide the solution you need. A series of wide ground blades shield signal terminals from adjacent lines, resulting in 50 ohms matched impedance in systems operating at up to 600 MHz, and crosstalk of 1.47% near end and 1.37% far end at 300MHz. How do you like those numbers?

Read More | Get Datasheet

Memory On The Move

If your project includes memory modules, check this article first for information on designing-in connectors to best meet the needs of your application.

Industry-Standard Connectors

Need connectors that meet industry standards? Then you’re in the right place. FCAL offers an impressive line-up of connectors for the most popular standards and in a dizzying array of configurations. Don’t believe us? Go ahead. Check out our standard list and click to the accompanying data sheets.